[Wlug] Fedora Core 6 kernel source???

[ken jones]

Here are the important results of lsmod and lspci.

[root at kjones-fedora alsa-driver-1.0.9rc4a]# /sbin/lsmod | grep snd
[root at kjones-fedora alsa-driver-1.0.9rc4a]# /sbin/lspci -vvv
02:09.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X
        Subsystem: Creative Labs Unknown device 1003
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 3
        Region 0: I/O ports at dc40 [size=32]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:09.1 Input device controller: Creative Labs [SB Live! Value] Input 
device controller
        Subsystem: Creative Labs Unknown device 1003
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Region 0: I/O ports at dc70 [size=8]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
---------------------------------------------------------------------------------
Back around Core3 and Core4 I used "soundon" and "soundoff" from 
<http://www.4front-tech.com/>.
That is where this all started.  Open Sound System does not work 
either.  Here is what happens when I
type 'soundon'.

-------------start Open Sound System snip-------------
[root at kjones-fedora alsa-driver-1.0.9rc4a]# soundon
Relinking OSS kernel modules for "2.6.18-1.2849.fc6 SMP mod_unload 586 
REGPARM 4KSTACKS gcc-4.1"
This may take few moments - please stand by...

OSS build environment set up for REGPARM kernels


Warning: Cannot locate the Linux kernel development package for
         Linux kernel version  2.6.18-1.2849.fc6
         Please install the kernel development package if linking the
         OSS modules fails.

The kernel development package may be called kernel-devel, kernel-smp-devel,
kernel-sources, kernel-headers or something like that. Please refer
to the documentation of your Linux distribution if there are any
difficulties in installing the kernel/driver development environment.

Assuming that you are using Fedora Core 5 or later
the right kernel source package (RPM) is probably called
kernel-smp-devel.

Building module osscore
Failed to compile OSS
make -C /lib/modules/2.6.18-1.2849.fc6/build M=/usr/lib/oss/build modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
make[1]: *** No rule to make target `modules'.  Stop.
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
make: *** [default] Error 2

Relinking the OSS kernel modules failed
[root at kjones-fedora alsa-driver-1.0.9rc4a]# 

-----------------end OSS snip-----------

(Why do my messages to WLUG have grey fonts instead of black?)
Ken Jones